XML.

Extensible Markup Language (XML) is a markup language that defines a set of rules for encoding documents in a format which is both human-readable and machine-readable. It is defined by the W3C's XML 1.0 Specification and by several other related specifications, all of which are free open standards. The design goals of XML emphasize simplicity, generality and usability across the Internet. It is a textual data format with strong support via Unicode for different human languages. Although the design of XML focuses on documents, it is widely used for the representation of arbitrary data structures such as those used in web services. Several schema systems exist to aid in the definition of XML-based languages, while many application programming interfaces (APIs) have been developed to aid the processing of XML data.

Applications Of XML.

As of 2009, hundreds of document formats using XML syntax have been developed, including RSS, Atom, SOAP, and XHTML. XML-based formats have become the default for many office-productivity tools, including Microsoft Office (Office Open XML), Open Office.org and Libra Office (Open Document), and Apple's iWork. XML has also been employed as the base language for communication protocols, such as XMPP. Applications for the Microsoft .NET Framework use XML files for configuration. Apple has an implementation of a registry based on XML.

XML has come into common use for the interchange of data over the Internet. IETF gives rules for the construction of Internet Media Types for use when sending XML. It also defines the media types application / xml and text / xml, which say only that the data are in XML, and nothing about its semantics. The use of text / xml has been criticized as a potential source of encoding problems and it has been suggested that it should be deprecated. also recommends that XML-based languages be given media types ending in +xml; for example image/svg+xml for SVG. Further guidelines for the use of XML in a networked context may be found in, also known as IETF BCP 70 a document which covers many aspects of designing and deploying an XML-based language.

Key Terminology.

The material in this section is based on the XML Specification. This is not an exhaustive list of all the constructs that appear in XML; it provides an introduction to the key constructs most often encountered in day-to-day use.

(Unicode) Character.

By definition, an XML document is a string of characters. Almost every legal Unicode character may appear in an XML document.

Processor And Application

The processor analyzes the markup and passes structured information to an application. The specification places requirements on what an XML processor must do and not do, but the application is outside its scope. The processor (as the specification calls it) is often referred to colloquially as an XML parser.

Markup And Content

The characters making up an XML document are divided into markup and content, which may be distinguished by the application of simple syntactic rules. Generally, strings that constitute markup either begin with the character < and end with a >, or they begin with the character & and end with a ;. Strings of characters that are not markup are content. However, in a CDATA section, the delimiters <![CDATA[ and ]]> are classified as markup, while the text between them is classified as content. In addition, whitespace before and after the outermost element is classified as markup.

Tag.

A markup construct that begins with < and ends with >. Tags come in three flavors:

start-tags; for example: <section>
end-tags; for example: </section>
empty-element tags; for example: <line-break />

Element.

A logical document component which either begins with a start-tag and ends with a matching end-tag or consists only of an empty-element tag. The characters between the start- and end-tags, if any, are the element's content, and may contain markup, including other elements, which are called child elements. An example of an element is<Greeting>Hello, world.</Greeting> (see hello world). Another is <line-break />

Attribute.

A markup construct consisting of a name/value pair that exists within a start-tag or empty-element tag. In the example (below) the element img has two attributes, src and alt:

<img src="madonna.jpg" alt='Foligno Madonna, by Raphael' />

Another example would be.

<step number="3">Connect A to B.</step>

where the name of the attribute is "number" and the value is "3".

An XML attribute can only have a single value and each attribute can appear at most once on each element. In the common situation where a list of multiple values is desired, this must be done by encoding the list into a well-formed XML attribute with some format beyond what XML defines itself. Usually this is either a comma or semi-colon delimited list or, if the individual values are known not to contain spaces, a space-delimited list can be used

<div class="inner greeting-box" >Hello!</div>

where the attribute "class" has both the value "inner greeting-box" and also indicates the two CSS class names "inner" and "greeting-box".

Characters and escaping.

XML documents consist entirely of characters from the Unicode repertoire. Except for a small number of specifically excluded control characters, any character defined by Unicode may appear within the content of an XML document. XML includes facilities for identifying the encoding of the Unicode characters that make up the document, and for expressing characters that, for one reason or another, cannot be used directly.

Valid Characters.

Unicode code points in the following ranges are valid in XML 1.0 documents:

U+0009, U+000A, U+000D: these are the only C0 controls accepted in XML 1.0;
U+0020–U+D7FF, U+E000–U+FFFD: this excludes some (not all) non-characters in the BMP (all surrogates, U+FFFE and U+FFFF are forbidden);
U+10000–U+10FFFF: this includes all code points in supplementary planes, including non-characters.

XML 1.1 extends the set of allowed characters to include all the above, plus the remaining characters in the range U+0001–U+001F. At the same time, however, it restricts the use of C0 and C1 control characters other than U+0009, U+000A, U+000D, and U+0085 by requiring them to be written in escaped form (for example U+0001 must be written as  or its equivalent). In the case of C1 characters, this restriction is a backwards incompatibility; it was introduced to allow common encoding errors to be detected.

The code point U+0000 is the only character that is not permitted in any XML 1.0 or 1.1 document.

Encoding detection.

The Unicode character set can be encoded into bytes for storage or transmission in a variety of different ways, called "en-codings". Unicode itself defines en-codings that cover the entire repertoire; well-known ones include UTF-8 and UTF-16. There are many other text en-codings that predate Unicode, such as ASCII and ISO/IEC 8859; their character repertoires in almost every case are subsets of the Unicode character set. XML allows the use of any of the Unicode-defined en-codings, and any other en-codings whose characters also appear in Unicode. XML also provides a mechanism whereby an XML processor can reliably, without any prior knowledge, determine which encoding is being used. En-codings other than UTF-8 and UTF-16 will not necessarily be recognized by every XML parser.

Escaping.

XML provides escape facilities for including characters which are problematic to include directly. For example:

The characters "<" and "&" are key syntax markers and may never appear in content outside a CDATA section.
Some character en-codings support only a subset of Unicode. For example, it is legal to encode an XML document in ASCII, but ASCII lacks code points for Unicode characters such as "é".
It might not be possible to type the character on the author's machine.
Some characters have glyphs that cannot be visually distinguished from other characters: examples are
- non-breaking space ( ) " "
  compare space ( ) " "
- Cyrillic Capital Letter A (А) "А"
  compare Latin Capital Letter A (A) "A"
  There are five predefined entities:
  - < represents "<"
  - > represents ">"
  - & represents "&"
  - ' represents '
  - " represents "
  All permitted Unicode characters may be represented with a numeric character reference. Consider the Chinese character "中", whose numeric code in Unicode is hexadecimal 4E2D, or decimal 20,013. A user whose keyboard offers no method for entering this character could still insert it in an XML document encoded either as 中 or 中. Similarly, the string "I <3 Jörg" could be encoded for inclusion in an XML document as "I <3 Jörg".
  
  "" is not permitted, however, because the null character is one of the control characters excluded from XML, even when using a numeric character reference. An alternative encoding mechanism such as Base 64 is needed to represent such characters.
  
  Comments.
  
  Comments may appear anywhere in a document outside other markup. Comments cannot appear before the XML declaration. Comments start with "". For compatibility with SGML, the string "--" (double-hyphen) is not allowed inside comments;^[16] this means comments cannot be nested. The ampersand has no special significance within comments, so entity and character references are not recognized as such, and there is no way to represent characters outside the character set of the document encoding.
  
  An example of a valid comment: ""
  International Use.
  
  This example contains Chinese text. Without proper rendering support, you may see question marks, boxes, or other symbols instead of Chinese characters.
  
  This example contains Cyrillic text. Without proper rendering support, you may see question marks or boxes, misplaced vowels or missing conjuncts instead of Cyrillic letters.
  
  XML 1.0 (Fifth Edition) and XML 1.1 support the direct use of almost any Unicode character in element names, attributes, comments, character data, and processing instructions (other than the ones that have special symbolic meaning in XML itself, such as the less-than sign, "<"). The following is a well-formed XML document including Chinese, Armenian and Cyrillic characters:
  <?xml version="1.0" encoding="UTF-8"?> <俄语 լեզու="ռուսերեն">данные</俄语>